|
|
==============================
README for GEX 5.0 Map Update
Version 08
10 June 2016
==============================
----------------
Changes
----------------
================
CLOSEOUT-VAL v2
Enhancement: Added a new content-based routing variable based on the value of
N104 when N106="TO" to support routing 567C X12 transactions to channels calling
the new SPS-567C message type for SPS consuming systems.
================
DEAMS-SPS-FC v1
Enhancement: Added DEAMS-SPS-FC map family (WebSphere TX 8.0) to transform
Defense Enterprise Accounting and Management System (DEAMS)-generated Standard
Procurement System (SPS) xProcurement transactions with foreign currency
designated values populated in the KONotes section into the appropriate SPS
xProcurement fields. Please refer to the respective email for details on CONOPS,
channel/route configuration, and deployment strategy.
============
DTS-XML v10
Enhancement: In anticipation of the eventual deployment of the Defense Travel
System (DTS) Next Generation (NextGen) and in order to be able to discern DTS
NextGen-originated transactions from DTS-originated transactions, modified logic
in DTS-XML U2X map for DTSAuth, DTSAR, DTSNOC, DTSVch, and DTSAck transactions
for deriving the values of GS02 plus N104 and N102 when N101="FR" by replacing
the previous rule:
If LEFT1 of TANUM = "I"-"Z", map "CUI_WEST_", else map "CUI_EAST_"
with the new rule:
If LEFT1 of TANUM = "M"-"Z", map "NEXT_GEN_", else map "CUI_EAST_"
DTS NextGen-originated transactions will cite TANUM values where the leftmost
position begins with "M" or higher.
=============
EBS-WAWF3 v3
Enhancement: This update supports Wide Area Work Flow (WAWF) Engineering Change
Proposal (ECP) 794, Deficiency Report (DR) 1269 Extract Contract Number Type,
and is part of Invoicing, Receipt, Acceptance and Property Transfer (iRAPT)
release 5.9.
===========
EDA-SYN v8
Enhancement: Added caret, "^", to the element separator restriction list in the
incoming X12 type tree used by the EDA-SYN X2U map.
=============
EDM-WAWF3 v4
Enhancement: This update supports WAWF ECP 794, DR 1269 Extract Contract Number
Type, and is part of iRAPT release 5.9.
===================
FABS-TELCO-NAME v1
Enhancement: Added FABS-TELCO-NAME map family (WebSphere TX 8.0) to support
WAWF ECP 884, Defense Information Systems Agency (DISA) Telecom, and is part of
iRAPT release 5.9. Please refer to the FABS-WAWF-TELCO IDG for details on
CONOPS, channel/route configuration, and deployment strategy.
===================
FABS-WAWF-TELCO v1
Enhancement: Added FABS-WAWF-TELCO map family (WebSphere TX 8.0) to support
WAWF ECP 884, DISA Telecom, and is part of iRAPT release 5.9. Please refer to
the FABS-WAWF-TELCO IDG for details on CONOPS, channel/route configuration,
and deployment strategy.
=========
MOCAS v3
Enhancement: This update supports WAWF ECP 794, DR 1269 Extract Contract Number
Type, and is part of iRAPT release 5.9.
============
MOCAS-RS v2
Enhancement: This update supports WAWF ECP 794, DR 1269 Extract Contract Number
Type, and is part of iRAPT release 5.9.
=============
MOCAS-X2X v2
Enhancement: This update supports WAWF ECP 794, DR 1269 Extract Contract Number
Type, and is part of iRAPT release 5.9.
=================
MSC-WAWF4-OTA v2
Problem: The sizes of some recent production XML invoices mapped by WAWF4-INV
cause a block element of data in the MSC-WAWF4-OTA X2U map to exceed the 64KB
element size default.
Solution: Added paging to P128:16 in MSC-WAWF4-OTA's message descript file to
permit that element to be processed without overflowing the size limit.
================
NAVCON-WAWF3 v2
1. Enhancement: This update supports WAWF ECP 794, DR 1269 Extract Contract
Number Type, ECP 724 Credit Invoices, and is part of iRAPT release 5.9.
2. Enhancement: Modified X2U map to support Prompt Pay Codes via the iRAPT to
Standard Accounting and Reporting System (STARS) requirement, specifically map
"N" to the A2-13, Cash Management Code when the 9th position in the Procurement
Instrument Identifier (PIID) is "1" or "2".
==============
NERP-WAWF3 v4
Enhancement: This update supports WAWF ECP 794, DR 1269 Extract Contract Number
Type, ECP 724 Credit Invoices, and is part of iRAPT release 5.9.
================
ONEPAY-WAWF3 v3
Enhancement: This update supports WAWF ECP 794, DR 1269 Extract Contract Number
Type, ECP 724 Credit Invoices, and is part of iRAPT release 5.9.
===============
REJECT-DTS2 v2
Enhancement: Per the Change Request (CR) approved by the DTS Program Management
Office (PMO) in anticipation that the Centralized Disbursing System (CDS) will
switch to receiving DTS Rejects via email, vice Secure File Transfer Protocol
(SFTP) when the CDS interface is migrated from DISA Ogden to DLA Transaction
Services, modified the REJECT-DTS2 X2U map to mask the Traveler SSN field as
follows:
Positions 1-5: Hardcode "#####"
Positions 6-9: Map last 4 numeric positions of MIT Loop 1, MSG Subfield 5 from
the X12 864
=============
STARS-EDM v3
Enhancement: This update supports WAWF ECP 794, DR 1269 Extract Contract Number
Type, and is part of iRAPT release 5.9.
===================
STARS-WAWF-ACCT v3
Enhancement: This update supports WAWF ECP 794, DR 1269 Extract Contract Number
Type, and is part of iRAPT release 5.9.
=================
UID-DIRECT-FF v6
Enhancement: This update supports iRAPT release 5.9, ECP 901 Item Unique
Identification (IUID) attachments, by allowing processing of 5.2 Flat Files and
still maintain the ability to process 5.1.1 Flat Files.
==============
UID-XML-MD v2
Enhancement: This update supports iRAPT release 5.9, ECP 901 IUID attachments, by
allowing processing of 5.1 and 5.2 UID XML schema files and new Government
Furnished Property (GFP) Attachment Files.
===============
UID-XML-RSP v2
Enhancement: This update supports iRAPT release 5.9, ECP 901 IUID attachments, by
allowing processing of new IUID Registry Response files for GFP Attachments.
=============
WAWF-567C v4
Enhancement: Added a new content-based routing variable based on the value of
N104 when N106="TO" to support routing 567C X12 transactions to channels calling
the new SPS-567C message type for SPS consuming systems.
=============
WAWF-CAGE v1
Enhancement: Added WAWF-CAGE map family (WebSphere TX 8.0) to supports WAWF ECP
874, Automate Contract Distribution/850-860 Request, and is part of iRAPT release
5.9. Please refer to the WAWF-CAGE IDG for details on CONOPS, channel/route
configuration, and deployment strategy.
===============
WAWF-DLA-TQ v2
Enhancement: This update supports WAWF ECP 842, Use of Alternative fuels on
Quality Tab, and is part of iRAPT release 5.9, by modifying the mapping logic to
support the updated iRAPT Quality schema.
============
WAWF-IGT v4
Enhancement: This update supports new WAWF requirements from System Problem
Report, WAWF Issue Track (WIT) Issue 5498 by allowing the GTCNumber tag size to
be 20/20 per the updated schema.
=============
WAWF3-GFP v4
Enhancement: This update supports WAWF ECP 794, DR 1269 Extract Contract Number
Type, and is part of iRAPT release 5.9.
=============
WAWF3-INV v6
Enhancement: This update supports WAWF ECP 794, DR 1269 Extract Contract Number
Type, ECP 724 Credit Invoices, and is part of iRAPT release 5.9.
============
WAWF3-RA v5
Enhancement: This update supports WAWF ECP 794, DR 1269 Extract Contract Number
Type, and is part of iRAPT release 5.9.
=============
WAWF4-INV v5
Enhancement: This update adds 1/REF/050 and 1/DTM/140 codes to the restriction
lists for 810C transactions, supporting WAWF ECP 884, DISA Telecom, and is part
of iRAPT release 5.9.
|
